Showing posts with label Whitewash Card Stock. Show all posts
Showing posts with label Whitewash Card Stock. Show all posts

Monday, November 16, 2020

Stamp of the Month with Brutus Monroe


Hello everyone!  Today I'm sharing the new


It's so adorable!  This image would also work well for a Get Well card, too.
First I laid out my supplies.


I prepared my base first.  For my A2 size card base I used Whitewash card
stock.  This went really well with the patterned paper.  I used a piece of
embossed dotted green paper for the next layer.  I cut this to
4 1/8" x 5 3/8".  I made a separate panel for my center.  My patterned
paper, from the Paper Hearts paper pack, measures 2" x 4 1/2".  I used a
scrap of Whitewash card stock 1 1/8" x 4 1/2" leaving a bit of room for
adhering to the patterned piece.


With a decorative edge die I die cut a piece for the seam that matches the
yellow hearts in the patterned paper.
Next I stamped my image.


Again, I used the Whitewash card stock for a base.  I had decided to used
Prismacolor Pencils and this card stock is perfect for that!
I chose my colors as I went along.  I started with light layers.



I completed each color section before moving on to another.


I was swatching each color group onto a scrap of the Whitewash card stock and
making sure it matched the patterned paper before actually coloring.

Prismacolor Pencils used:
Green:  905, 992, 105, 901, 920, 1006
Yellow:  916, 917, 1011, 1002
Pink:  928, 926, 1031
Brown:  943, 945, 1030, 937


At this point I was undecided if I wanted to use Gamsol on the pencil work. I really
couldn't make up my mind.  I fussy cut the image leaving 1/8" edge around it...super
easy to cut out!  I stamped my sentiment onto the center piece using Simon Hurley
Tropical Tango ink...it was a perfect match!  I adhered my bear with foam tape to give the
 card a bit more dimension.  I added some Glossy Accents to 3 of
the pink hearts in the background and to the nose and eye of the bear.  Then I put
a couple of dots of Nuvo Jewel Drops in Aqua Plains.  My card was done, but
I did decide to use Gamsol on the coloring...I was much happier with how it looked!


I hope you enjoyed today's project!  I love how it turned out!
This project uses the Stamp of the Month which is a subscription product!
There are many more products that you can get by subscription!
Go to BrutusMonroe.com and check out all of their wonderful
products!  There's an awesome sale going on as well!

Thank you so much for stopping by and spending time here at my blog!

Betsy

In my capacity as a design team member for Brutus Monroe, I do receive the products I use from them.

All opinions and creative decisions remain my own, and I only work with companies/use products that I love.









 

Wednesday, September 30, 2020

Fall Coffee Joy with Brutus Monroe

 

Hello Brutus Monroe fans!  Since we're all on a coffee theme this week I decided to make a coffee themed card!  I used a variety of products carried at www.Brutus Monroe.com.  Let me show you how I made my card!


I stamped out my images using the Cozy Coffee Stamp Set and the Autumn Essential
Stamp Set onto Neenah 80lb Classic Crest Solar White card stock with Raven Detail
ink.  I chose my paper from the Autumn Foliage Paper Pad and also decided to use
one of the new Felt Doilies in Wheat.  I chose to color my images using Copic
markers.  After coloring them I fussy cut them out (not realizing there's a cut file!).


Copic colors used:

Leaves & Stems:  BG11, BG93, BG96  Glaze:  G00
White Pumpkin:  W1, W2, BG93
Orange Pumpkin:  Y38, YR16, YR18
Coffee Cup:  E21, E31, E33  Lid:  W1
Buttons:  E31, E33, E35, E37
Sweater:  Y11, Y21, Y17

I prepared a top folding A2 size card base from Whitewash card stock.  I cut my
patterned paper to 4" x 5 1/4" and adhered it to the base.  Before adhering the doily
I trimmed off about 3/8" off the left side and adhered that down to the center left
of my card.  I only put glue on the solid middle part.  The felt is nice and sturdy
and I knew it would be ok not to glue it down.


Next I stamped my sentiment on Whitewash card stock using the new Collab stamp set
Simple Strips - Crafty!  This is a crafty collab with Taylored Expressions and Brutus Monroe.  If
you are not familiar with these sets - there are 18 sentiments!  One stamp - one die!  So
handy!  And Taylored Expressions now sells a container with trays that holds all the
sentiments!
I cut a piece of card stock 4 3/4" x 6".  That fits exactly into my Mini Misty.  The stamp
also fits exactly into it!  I stamped with Raven Detail Ink.


The black squares on either side are so there to line up the die.  After die cutting the
sentiments I put them away in my handy container and kept out the one I wanted to use.
I arranged my images in the center of the doily.  I did not use foam tape, but just adhered
everything flat.  I used a liquid glue for this.  After coloring in the little heart on the
sentiment I adhered it across the bottom of the doily and just need a bit of foam tape
on the right side.  And my project was done!


This was so much fun to make!  So many products from Brutus Monroe!

Thank you so much for stopping by today!  I hope I've inspired you
to create your own Autumn Coffee card!

Betsy

In my capacity as a design team member for Brutus Monroe, I do receive the products I use
 from them.  All opinions and creative decisions remain my own, and I only work with 
companies/use products that I love.